One Minute Quality Fact Finder 2. As addressed in ISO 9000-2000/AS 9100/QS 9000/ISO 9001/9002 Quality Standards, by Gunther B. Gumpp
(Published by QCSS-2000) ISBN 1-8810067-48-1 (8.5" X 11", soft cover, 60 pages)
New Books and Bestsellers on Quality
One Minute Quality Fact Finder
2.
As addressed in ISO 9000-2000/AS
9100/QS 9000/ISO 9001/9002 Quality Standards, by Gunther B. Gumpp
(Published by
QCSS-2000) ISBN 1-8810067-48-1 (8.5" X 11", soft cover, 60 pages)
This booklet contains hundreds of definitions and practical and easy to
understand explanations of current quality system terms
and requirements
including a listing of reference books for detailed research and a listing of
common acronyms as stated in
these and related standards. Based on hundreds of
actual implementation services, audits and workshops performed by the
author. It
addresses such questions such as : What is accuracy? What is a critical
characteristic verses a key characteristics?
What is sampling inspection by
attributes verses variables? What is a quality policy verses a vision and
mission statement?
What does positive recall mean? What is total quality
management verses ISO 9000 quality system management? What is a
sector specific
standard? What is a system flow down? What is last part quality comparison? What
is an internal audit verses
an external audit? What is ISO? What is TQM? What is
the Pareto principle? What are the eight management principles
required in the
new ISO 9000-2000 standard? What is a work instruction verses a system
procedures? What is first party
certification verses second and third party
certification and registration? What is six sigma? And much more. An excellent
training and reference book written for every one to understand, involved in
quality and quality system implementation. An
indispensable reference and guide
for the CEO of the Company, the QA Manager, the Inspector, to the Shop
Supervisor and
the Operator on the Machine. 60 p.p. soft cover.
Order no:
17-2-Q2004
One Minute Quality Fact Finder
3. Open
4. Open
5. How To
Implement AS 9100/ISO 9001-2000 Quality Systems, by Gunther B. Gumpp 2004. Explains
in simple terms steps on how to implement a quality management system based on
ISO 9000 standard requirements. It includes a helpful conversion chart
from the previous 1994/1997 to current 2004 requirements. In addition, the
package includes separate guidelines published by the TC176 task group which was
instrumental for creating the ISO 9001 standard. The guideline package
consists of: guidance on application, guidance on documentation, guidance
on the process approach and guidance on terminology. 85 pages.
Soft cover. Contents is based on seminar presentation held by Gunther B.
Gumpp to approximately 200 companies in the past. (QCSS Publishing ISBN-1881006-2X)
Order no: 17-5-Q2004
6. Open
7. Deburring
and Edge Finishing handbook, by Mr. Laroux K. Gillespie 448 p.p. Hardcover
8. How to Improve
Processes in the Manufacturing and Machine Shop Environment, by Gunther B.
Gumpp 2004.
(ISBN 1-881006-68-10) available June 2004
Order no: 17-8-Q2004
9. Strategic Planning
for the Small Business, by C.S. Rice, 1999.
(ISBN 1055850-858-9)
Order no:
17-9-Q2004
10. Searching for Zero,
A Guide to Calibration and Uncertainty
Factors, (By American Measuring and Tool Manufacturers Association,
1999)
The only known instruction and data guide for measurement equipment uncertainty.
Contains uncertainty data on inspection and
measurement equipment common to the manufacturing
and machine shop environment.
Order no:
17-10-Q2004
11. What is Total
Quality Control? The Japanese Way, by Kaoru Ishikawa 1985.
(ISBN 013-952433-9) The quality bible on quality control systems
and management of quality control systems.
Order no: 17-11-Q2004
12. Open
13. ISO 9000:2000 Explained, by Joseph Tsiakals, Charles Cianfrani
and Jack West 1999. 260 p.p.
Order no:
17-13-Q2004
14. ISO 9000:2000
Standards-Compilation, includes the latest ISO 9000, 9001, and 9004
revisions.
Order no:
17-14-Q2004
15. ISO 9001:2000 Audio
Workshop and Master slide
Presentation, includes a 85 pages workbook, also
available in CD version and a 109
minutes audio tape.
Order no:
17-15-Q2004
16. Quality Planning and
Analysis, by Juran and Gryna. 1980.
(ISBN
007-033178-2) Still one of the best books on Quality Panning written by the
masters.
Order no:
17-16-Q2004
17. Juran’s Quality Handbook, by J.M. Juran, 1999.
THE bestseller on Quality by the most renowned quality
master in our century. Coined the Encyclopedia Britannica of Quality.
(ISBN 007-034003) 1936 printed pages , completely revised.
Order no:
17-17-Q2004
18. Out of the Crisis,
by W.E. Deming, 1986.
Order no:
17-18-Q2004
19. Total Quality
Control, by A. F. Feigenbaum,
863 p.p.1991.
Order no:
17-19-Q2004
20. Open
21. SPC Simplified ,
Practical Steps To Quality, by R. Amsden, H. Butler and D. Amsden, 1986.
Excellent work book on SPC, easy to follow and to
understand.
Order no: 17-21-Q2004
22. The Six Sigma Handbook, by T. Pyzdek 2000. Hardcover-711 p.p.
Order no: 17-22-Q2004
23. Running Today’s Factory, A Proven Strategy for Lean Manufacturing, by Charles
Standard and Dr. Dale Davis (ISBN 1-56990-257-7) 304 p.p.
Order no: 17-23-Q2004
24. How to Assure Quality in Plastics, by Merry Keating (ISBN 1056990-180-5)
Order no:
17-24-Q2004
25. Dictionary of Mechanical Engineering by Gordon Nailer fourth Edition 480 p.p. Soft cover
Order no:
17-25-ME2004
26. Marks Standard Handbook for Mechanical Engineers, tenth edition,1956 p.p. Hard Cover
Order no:
17-26-ME2004
27. Machinery’s
Handbook, 25th edition. New Large Print Edition. A Reference
Handbook for Mechanical and Manufacturing
Engineers, Draftsman, Tool makers and Machinists.
Tool Box Edition 1975 p.p. Hard cover
Order no:
17-27-ME2004
28. Statistical Methods for Quality Control, vol 1: Terminology and
Symbols, Acceptance Sampling-1995. Paperbound,494 p.p.
Order
no: 17-28-Q2004
30. Statistical Methods for Quality Control, vol 2: Measurement Methods
and Results, Interpretation of Statistical Data, Process
Control -1995. Paperbound,386 p.p.
Order
no: 17-30-Q2004
31. Statistical Process Control, A Training Manual and Implementation Guide, by R. O Con.
Helps to reduce cost, increase profitability and satisfies
customers. A practical hands on guide and training to SPC, includes a
simple 5
step implementation guide.
Order
no: 17-31-Q2004
32. Total Quality
Development: A Step by Step Guide to
World Class Concurrent Engineering,
by Don P. Clausing. Hard cover 1994,
506 pages $95.00
Order no:
17-32-Q2004
33. Lean Thinking,
Banish Waste and Create Wealth in Your Corporation, by James Womak and
Daniel Jones. 1996, hardbound 352
p.p.
The authors of the landmark book “The Machine that
Changed the World’, explaining in this new book how companies can
dramatically
improve their performance through the lean production approach.
Order no:
17-33-Q2004
34. Reliability for Technology, Engineering and Management, by Paules Kales, 1998. 425 p.p.
Order no:
17-34-Q2004
35. Electronics Reliability Handbook, hardbound 1987, 500 p.p.
Order no:
17-35-Q2004
36. Automotive Handbook, by Bosh. 892 p.p. Vynil Cover 1996.
Order no:
17-36-Q2004
37. The Internet for Scientists and Engineers, by Brian J. Thomas, 1997/98 edition.
Designed for
novices and experienced users to the vast technical resources available on line,
more then 200 pages of useful
scientific resources and other useful information
and tools. 520 p.p., hardcover,
Order no:
17-37-Q2004
38. The World Wide Web for Scientists and Engineers, by Brian J. Thomas, 1998 354 p.p., soft cover
A complete reference
for navigating, researching, and publishing online.
Order no: 17-38-Q2004
39. Geometric Dimensioning and Tolerancing, Y14.5.
(Engineering Drawing and Tolerancing Practices) 1994, 245 p.p. soft cover,
Order no:
17-39-Q2004
40. Geometric Tolerancing Y14.5 Application Workbook, by Alex Krulilowski, 1994. 200 p.p.
A companion edition to order no. 18-33-ME2000.
Helps to understand Geometric
Tolerancing and Dimensioning-Y14.5.
Order no:
17-40-Q2004
41. Geometric Tolerancing Y14.5-Self Study Workbook, by Alex L. Krulilowski, 1994.
500 p.p., soft cover-three ring binder. (Also available in Spanish
Version) An illustrated easy to use start to finish self
training course in Geometric
Dimensioning and Tolerancing.
Order No: 17-41-Q2004
42. Open
43. Engineering Effectiveness, by M. Fleisher and J. Liker, 1997. 512 p.p.
Provides all the tools needed to
achieve systems integration across organizational boundaries. Includes
methodology of work
processes, people systems and supply chain issues and many
more related topics in an organized approach. Authors are recipients
of two
Shingo Awards for publications about manufacturing.
Order no: 17-43-Q2004
44. SIC and NAICS Codes:
Standard Industrial Classification (SIC) Codes and the new North American
Industry Classification
System - (NAICS) Codes.(QCSS 1999/2000) 60
p.p. 8.5x11.0, soft cover
Identifies hundreds of (SIC) and new (NAICS) industries,
particularly new high tech manufacturing categories. A reference source
for any
industry branch.
Order no:
17-44-Q2004
45. Open
46. The Metals Black Book: Ferrous Metals ON CD ROM, Third Edition 1998. On CD-ROM.
This CD ROM contains more than 600,000 data entries covering carbon steels,
alloy steels tool steels, cast iron and stainless
steels in all forms. In addition
it provides over 1,200 American (ASTM, UNS, AISI, SAE, MIL, etc..) and
international (DIN, BS,
NF, JIS, SSS, GOST) cross references and specification
designations, including Chemical Compositions and Mechanical and
Physical
Properties. The CD ROM is fully searchable.
Order No: 17-46-Q2004
47. The Metals Black Book: Ferrous Metals, Third Edition 1998. Hardcopy
Book Edition,, 750 p.p.
Contents as above on CD ROM, except this is the hardcopy book edition.
Order No: 17-47-Q2004
48. The Metals Red Book: Nonferrous Metals ON CD ROM, Second Edition 1998. CD ROM, 624 p.p.
This CD ROM contains over 500,000 data entries covering aluminum, copper,
nickel, titanium, zinc, tin, precious metals, tungsten
carbide, zirconium and
cobalt metals and their alloys. In addition it includes over 2000 American and
international specifications
including its Mechanical and Chemical and
Physical Properties. The CD ROM is fully searchable.
Order No: 17-48-Q2004
49. The Metals Red Book: Nonferrous Metals, Second Edition 1998. Hardcopy
Book Edition, 624 p.p.
Contents as above on CD ROM, except this is the hardcopy book edition.
Order No.: 17-49-Q2004
50. Software Quality Assurance, by G.Shulmeyer and Mc Manus-Editors, 1999.
Hardcover Book, 712 p.p
Some of the worlds leading software experts share their practical experience
of todays techniques managing software quality.
Order No.: 17-50-Q2004
Licensing and Distributorship Agreements available!
This site designed and maintained by
EZ2 Networks
Copyright © Quality Control Systems and Services
2004,
Last Updated 02/02/2006